0

Sony RX100 VA (also fits V, IV, III, II &1) Quick Change Filter Adapter Kit 52mm by Lensmate

This custom Sony RX100 VA compact 2 Part system allows you to add any standard 52mm filter to your camera with no vignetting through out the entire focal range. 

 Also fits RX100 V, IV, III, II, or RX100. Does not fit the new RX100 VI.

 

  • $ 24.95



Now you can add filters to your Sony RX100 VA also fits RX100 V, IV, III, II or RX100 with no vignetting through out the entire focal range.
Sony RX100 V Adapter parts

Using the Lensmate Quick-Change Filter Adapter kit, only the tiny receiver stays on the camera (it adds only 3mm to the depth of the camera). The filter/filter holder assembly bayonets onto the receiver for quick changes without having to thread the filter on and off. The filter holder is retained by a low tension locking system, so very little torque is applied to the lens barrel when attaching and detaching it.

There is no chance of flash blockageat any focal length (with the filter holder removed), since the receiver is smaller in diameter than the end of the lens barrel. It attaches to the camera using a 3M dual-sided adhesive film which holds tenaciously yet is easy to remove cleanly and safely when desired.

We designed the system so that the filter remains in the filter holder and is attached/detached as an assembly. The filter holder bayonets onto camera with less than 90 of rotation to the locked position.

The low tension locking system assures that the lens barrel won't be harmed by over-enthusiastic tightening (or loosening) of the filter. The ability to quickly change the filter without having to thread/unthread should appeal to filter users. You'll find that you're more likely to use your filters when they can be mounted and removed this easily.

The Sony RX100 VA Quick Change Filter Adapter Kit 52mm (also fits RX100 V, RX100 IV, RX100 III /RX100 II /RX100) is comprised of the following:

  • The receiver with custom 3M adhesive ring (Part 1- stays on the camera)
  • The filter holder (Part 2)
  • 52mm clip in style lens cap with tether.
  • A hinged lid container for the filter/filter holder/lens cap assembly for convenient storage.
  • Safe removal device.
  • Install tool only required for RX100 VA, RX100 V, RX100 IV & RX100 III.




Sale

Unavailable

Sold Out